Led Oti Dali 50/220-240/24 1-4 Channel Dim 4052899452916

OTi DALI 50/220-240/24 1-4 Channels CV Power supplies with DALI
Generation1 DALI driver

EAN: 4052899452916

Intelligent power matching thanks to Smart power supply

Slim form factor for mounting on the cove or in linear luminaires

Flicker free thanks to high PWM frequency

Emergency lighting EL sign

Available as Tunable White version (DALI Device Type 8)

DALI message detection LED Module failure

Dimmable via Touch DIM From 1 to 4 channels to arbitrary distribute the LED-power

Dimming range 0.1-100 %

Line frequency 0 Hz / 50 Hz / 60 Hz

Equipment / Accessories Suitable for 24 V LED modules

Cove lighting, wall washer, corridor, handrail

Suitable for use in luminaires of protection class I and II

EAN: 4052899452916

Nominal voltage: 220-240 V

Mains frequency: 50/60 Hz

Input voltage AC: 198-264 V

Total harmonic distortion: < 10 %

Power factor: > 0.95

ECG efficiency: 90 %

Device power loss: 5 W

Power loss in stand-by mode: 0.3 W

Inrush current: 43 A

Max. ECG no. on circuit breaker 10 A (B): 9

Max. ECG no. on circuit breaker 16 A (B): 15

Max. ECG no. on circuit breaker 25 A (B): 25

Surge capability (L/N-Ground): 2 kV

Surge capability (L-N): 1 kV

Nominal output voltage: 24 V U-OUT (working voltage): 24.2 V

Nominal output power: 50 W

Galvanic isolation: SELV

Galvanic isolation primary/secondary: 3.1 kV

Length: 346 mm

Width: 32 mm

Height: 22 mm

Mounting hole spacing, length: 300.6 mm

Product weight: 191 g

Cable cross-section, input side: 0.5-2.5 sqmm

Cable cross-section, output side: 0.2-1.5 sqmm

Wire preparation length, input side: 6 mm

Wire preparation length, output side: 5 mm

Casing material: Plastic

Ambient temperature range: -20 +45 C

Maximum temperature at tc test point: 70 C

Max.housing temperature in case of fault: 115 C

Permitted rel. humidity during operation: 5-85 %

ECG lifetime: 50000 h

Encapsulated: Yes

Dimmable: Yes

Dimming interface: DALI

Dimming range: 0-100 %

Dimming method: Pulse

Width Modulation

Overheating protection: Automatic reversible

Overload protection: Automatic reversible

Short-circuit protection: Automatic reversible

No-load proof: Yes

Max. cable length to lamp/LED module: 10 m

Suitable for fixtures with prot. class: I / II

Type of connection, output side: Screw terminal

Approval marks - approval: CE / ENEC 10 / VDE / VDE-EMC / RCM / EAC / CCC / BIS

Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015

Protection class: II

Temperature range at storage: -40 +85 C

Manufacturers Website: https://www.osram.com/ds/products/electronics/electronic-control-gears-for-led-modules-and-dimmers/indoor-ecg-for-led-modules-and-dimmers/constant-voltage-and150-dimmable/cv-power-supplies-with-dali