Led Driver Ot 250/220-240/24 P 24v 250w 4052899546028

Osram Led Driver Ot 250/220-240/24 P 24v 250w 4052899546028 LEDOT25024P

CV Power supplies 24 V Remove the limitations when you install light outside, with OPTOTRONIC CV 24 V power supplies. Ruggedly built, if you need a constant voltage source that can cope with damp or wet conditions and extremes of temperature, then a product from this range could be just what you need. These drivers are suitable for use in tight, flat luminaires and in suspended ceilings, and may be used outdoors (only within suitable luminaires). If you are creating signage, OPTOTRONIC CV 24 V power supplies work well with OSRAM signage LED modules such as BackLED and BoxLED, and in other settings they can be paired with suitably robust and protected modules such as LINEARlight Flex Protect, to give great performance, reliability and efficiency. All have a Smart Power Supply feature, and come with a 5 year guarantee. Product benefits: Large range of products from 20 W to 250 W Installation in very cold and hot environments Very stable output power High electronical reversible short-circuit, overload, overtemperature protection Smart Power Supply boosting power to turn on cold LEDs Independent installation possible Product features: DC mode functionality Type of protection IP66 and IP67 Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE) Wide operating temperature range -30 +55 C Lifetime up to 50000 h (temperature at max. tc) Areas of application: Facades, public squares, cruise ships Signage Education Hospitality Backlighting Light advertising Museums Monuments Facade illumination Architectural Decorative Suitable for indoor and outdoor installations EAN: 4052899546028 Nominal voltage: 220-240 V Mains frequency: 0-60 Hz Input voltage AC: 198-264 V Input voltage DC: 176-250 V Total harmonic distortion: < 15 % Power factor: 0.95 ECG efficiency: 92 % Device power loss: 21.7 W Inrush current: 75 A Max. ECG no. on circuit breaker 10 A (B): 3 Max. ECG no. on circuit breaker 16 A (B): 8 Max. ECG no. on circuit breaker 25 A (B): 13 Surge capability (L-N): 4 kV Nominal output voltage: 24.2 V Nominal output power: 250 W Galvanic isolation: SELV Galvanic isolation primary/secondary: 3 kV Surge capability (L/N-Ground): 6 kV Length: 265 mm Width: 68 mm Height: 40 mm Mounting hole spacing, length: 250 mm Product weight: 1340 g Cable cross-section, input side: 1 sqmm Cable cross-section, output side: 1.5 sqmm Wire preparation length, input side: 90 mm Wire preparation length, output side: 90 mm Cable/wire length, input side: 300 mm Cable/wire length, output side: 300 mm Casing material: Metal Ambient temperature range: -30 +55 C Maximum temperature at tc test point: 80 C Max.housing temperature in case of fault: 110 C Permitted rel. humidity during operation: 5-85 % ECG lifetime: 50000 h Encapsulated: Yes Dimmable: No Overheating protection: Yes Overload protection: Yes Short-circuit protection: Yes No-load proof: Yes Suitable for fixtures with prot. class: I Type of connection, output side: Fixed connection (terminal) Number of channels: 1 Approval marks: ENEC/RCM/CCC/EAC Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384 Protection class: I Type of protection: IP66/IP67 Temperature range at storage: -40 +85 C Commodity code: 850440829000